Antreiben
Regeln
Positionieren

Operator panels for ...

... digital servo positioning amplifier MDR 2102, 2105 MDR 2302, 2305, 2310 MDR 2320, 2340

  • Operator panel for MDR 2000
    Operator panel for MDR 2000

This operator panel is perfectly adapted for servo positioning amplifiers of the series MDR 2102, 2105, 2302, 2305, 2310, 2320, 2340 and supports the user optimally in initiation, examination and in test assemblies.

  • Easy connection with pre-tailored 25poles connecting cable
  • An analogue set value controller ±10V DC and two analogue set value controllers 0-10V DC, one of them ona BNC-socket switchable for external set value voltage ±10V DC
  • Two analogue monitor-outputs ±10V routed on BNC-socket
  • 16-stage switch for positioning target selection on a binary display with four red LED's 
  • 8 digital switchable inputs, 6 of them with green LED control displays
  • 4 digital outputs each one with one red LED as display 

Along with the parameterizing program "ServoCommander™"application adjustments are realized cost- and time-saving. Use-oriented amplifier adjustments are realized and simulated without big efforts.

The simple handling allows a quick and comfortable initiation of the amplifier. Furhtermore it is possible to drive and test positioning targets parameterized by "ServoCommander™" by means of the 16poles stepping switch.

The two analogue monitor outputs via BNC-sockets are available for external measure and test functions. The different nominal and actual values can be related by means of the parameterizing program.

Technical data

Operator panel for series MDR 200

connection to the amplifier

25poles Sub-D-connector

dimensions (H x W x D)  mm

67 x 90 x 155

Protection class

IP 20

Article code

REMDRBEDIENBOX

 

 

... servo amplifier MDRM 24...48/10-32

  • Operator panel for MDRM 24...48/10-32
    Operator panel for MDRM 24...48/10-32

This operator panel is perfectly adapted for the decentralized intelligent servo positioning amplifier MDRM 24...48/10-32 and supports the user optimally in initiation, examination and in test assemblies.

  • Easy connection with pre-tailored lines 
  • Green LED control display for applied control voltage 24V DC
  • Two installed 9pole D-Sub sockets for CAN-Bus and RS-232 communication 
  • Max. 2 analogue set value controllers ±10V DC, one of them on BNC-socket switchable for external set value voltage ±10V DC
  • One analogue monitor-output 0V...10V routed on BNC-socket 
  • Max. 9 digital switchable inputs, all with green LED control display, each two of them reversible as analogue input 1 and 2, as well as CAN-Bus communication 
  • 3 digital outputs each with one red LED 

Along with the parameterizing program "MDRM ServoCommander™"application adjustments are realized cost- and time-saving. Use-oriented amplifier adjustments are realized and simulated without big efforts.

The simple handling allows a quick initiation of the amplifier. Furthermore it is possible to drive and test up to 64 parameterized positioning aims by means of the 6 digital inputs DIN0 to DIN5.

One analogue monitor output via BNC-socket is available for external measure and test functions. A nominal or actual value can be related to this analogue output by means of the "MDRM ServoCommander™".

Technical data

Operator panel MDRM

CAN-Bus connection, at the top

9pole Sub-D socket

RS-232 connection, left

9pole Sub-D socket

connection to MDRM

16pole JST-connection with earth- lamp

Control voltage cable 24V DC

Banana connector with red line 

Intermediate voltage alimentation max 60V DC

Banana connector with black line 

Ground of injection voltage

Banana connector with blue line

dimensions (H x W x D)  mm

67 x 90 x 155

Protection class

IP 20

Article code

REMDRMBEDBOX