Planetary gears Series PG 30

Planetary gears Series PG 30

Article code: GP030/1Ixxxx (xxxx = ratio i)

Maximum input speed:	3,000rpm
Backlash (unloaded):	<= 1°
Maximum shaft loading
axial:	<= 150N
radial 15mm from flange:	<= 150N
Temperature:	-30°C to +100°C

Technical data:

Ratio i	Nominal torque Mn in Nm	Pulsed torque Mi in Nm	Efficiency %	Weight without motor g	Length L1 without motor mm
3.71	1.50	3.0	88	107	27.1
14	0.35 (4.5)	0.5 (6.0)	80	139	35.1
43	1.20 (4.5)	1.6 (6.0)	70	171	43.1
66	1.80 (4.5)	2.4 (6.0)	70	171	43.1
134	3.50 (4.5)	4.5 (6.0)	60	203	51.2
159	4.50 (4.5)	6.0 (6.0)	60	203	51.2
246	4.50 (4.5)	6.0 (6.0)	60	203	51.2
415	4.50 (4.5)	6.0 (6.0)	55	235	59.2
592	4.50 (4.5)	6.0 (6.0)	55	235	59.2
989	4.50 (4.5)	6.0 (6.0)	55	235	59.2
1,526	4.50 (4.5)	6.0 (6.0)	55	235	59.2

Dimensions:

PG30+M3557(M3540)

Gears with a reduction >= 14:1 have plastic gear wheels in the input stage. For a longer durability required gears with exclusively metal gear wheels and special grease (gear 30/1) are available. The torque values in brackets refer to the 30/1S gear type with metal gear wheels.

* Replaces the old series PG 34. These gears are available until further notice.