The servo linear actuator transfers the rotation of a servo motor into a linear movement. The design of the actuator resembles common hydraulic or pneumatic cylinders and enables the simple retrofit of existing facilities. The spindle nut is integrated on the "A side" of the motor in the rotor. The rotor position is detected by an encoder system used at the same time for the motor commutation and speed control as well as for measuring system for the stroke. In case of continuous operation an automated grease cartridge can be connected.
Motor MISO |
|
|
|
|
|
| |||||
Size | Symbol | Unit | MISO 07 G | MISO 10 G | MISO 14 L | MISO 14 G | |||||
Voltage Drive |
| VAC | 400 V | 400 V | 400 V | 400 V | |||||
Stall torque* | T0 | Nm | 3,20 | 9,05 | 22,00 | 28,83 | |||||
Max. torque* | Tk | Nm | 8,64 | 24,44 | 59,4 | 77,84 | |||||
Stall current* | I0 | A | 2,2 | 5,69 | 13,8 | 17,94 | |||||
Max. pulse current* | Ipk | A | 5,93 | 15,35 | 37,26 | 48,33 | |||||
Power | Pn | W | 1077 | 2910 | 6105 | 6520 | |||||
Nominal speed | n | r/min | 3000 | ||||||||
Anzahl Pole | PN |
| 6 | 6 | 6 | ||||||
Feedback |
|
| Resolver | Resolver | Ø32 Resolver Ø40 Incrementel encoder Sin-Cos, Endat 2.2 | ||||||
Protection class |
|
| IP65 | ||||||||
Spindle Ø x lead |
|
| 16x5 | 16x10 | 25x5
| 25x10 | 32x5 40x5 | 32x10 40x10 | 32x5 40x5 | 32x10 40x10 | |
Force (theor) | F | kN | 4 | 2 | 11,3 | 5,6 | 27,6 | 13,8 | 35,6 | 17,7 | |
Stroke |
| mm | variable | ||||||||
Inertia | Jm | kgm2 | 3,09 | 11,64 | 50,53 | 58,73 | |||||
Brake | Jmb | kgm2 | 3,42 | 12,62 | 59,79 | 67,98 | |||||
V max | v | mm/sek | 250 | 500 | 250 | 500 | 250 | 500 | 250 | 500 |
*at Delta t = 100°C
The servo linear actuator transfers the rotation of a servo motor into a linear movement. The design of the actuator resembles common hydraulic or pneumatic cylinders and enables the simple retrofit of existing facilities. The spindle nut is integrated on the "A side" of the motor in the rotor. The rotor position is detected by an encoder system used at the same time for the motor commutation and speed control as well as for measuring system for the stroke. In case of continuous operation an automated grease cartridge can be connected.