MMC 24/3-10 BL/DC, MMC 24/6-10 BL/DC
| MMC 24/3-10 BL/DC | MMC 24/6-10 BL/DC |
| |
Power supply | UB | 12 ... 30 | 12 ... 30 | V DC |
PWM-sampling frequency | fPWM | 78.12 | 78.12 | kHz |
Efficiency | µ | 95 | 95 | % |
maximum permanent output current | Idauer | 3 | 6 | A |
maximum peak output current | Imax | 10 | 10 | A |
Current consumption of the electronic | Iel | 0.06 | 0.06 | A |
Number of revolutions |
| 5 ... 30,000 | 5 ... 30,000 | rpm |
Output voltage for external use | VCC | 5 | 5 | V DC |
- maximum load current | ICC | 60 | 60 | mA |
Input number 3, 4 ,51) | Input resistance | 22 | 22 | kOhm |
Analogue speed set point | DC tension signal | ±10 | ±10 | V |
Digital speed set point | Range of frequency | 100 ... 2,000 | 100 ... 2,000 | Hz |
| Ratio 50% | 0 | 0 | rpm |
| Ratio <50% | left handed | left handed |
|
| Ratio >50% | right handed | right handed |
|
External encoder / step frequency | famx | <= 400 | <= 400 | kHz |
Failure output | Open collector | max. UB/30mA | max. UB/30mA |
|
| No fault | switched through to GND | switched through to GND |
|
Interface | RS 232 | max. 115,200 | max. 115,200 | Baud |
Memory for utility program |
| 3.3 | 3.3 | kWord |
Working temperature |
| 0 ... +70 | 0 ... +70 | °C |
Storage temperature |
| -25 ... +85 | -25 ... +85 | °C |
Weights |
| 18 | 160 | g |
Article Code for BL-Motors: |
| NRMMC-24/3-10_BL | NRMMC-24/6-10_BL |
|
Article Code for DC-Motors: |
| NRMMC-24/3-10_DC | NRMMC-24/6-10_DC |
|
1) Can be configured through interface RS 232 (Value preset: analog speed setting), number 4 + 5 only DC version.